24/7 to order today
A successful water slide rental experience depends on proper cleaning, careful setup, and mindful post-party care. Here’s your step-by-step guide to keep your rental safe, fun, and looking brand new—from before it’s delivered to after the party wraps up.
Choose Level Ground: Pick a flat surface free from holes, rocks, or sharp debris. Avoid slopes, tree branches, fences, and power lines nearby.
Provide Space: Leave at least 5ft of clearance around all sides of the slide for safety and access.
Clear the Area: Remove sticks, pet waste, and any sharp objects before setup. For hard surfaces (like driveways), sweep thoroughly.
Water & Power Ready: Ensure a water source and hose are close to the setup area. Make sure an outdoor electrical outlet is available for the blower.
Use Tarps: Place a clean tarp under the slide before unrolling to protect the bottom from damage and reduce dirt transfer.
Unroll Carefully: Place the slide on the prepped area and connect the blower to the inflation tube tightly.
Secure Properly: Anchor the inflatable using stakes (for grass) or sandbags (for concrete) as directed—this prevents shifting and ensures user safety.
Connect Water: Attach the hose to the built-in misting system or slide sprayer, and test for leaks.
Test Before Use: Inspect inflation—no sagging or soft spots. Walk around the slide to double-check stability, anchors, and clear all pathways.
Safety First: Only begin play after full setup and staff/parent supervision is in place.
Inspect: Look for tears, loose seams, or signs of dirt/mold. Address any damage before use.
Light Cleaning: Use a soft towel to remove surface dust or residue as needed.
Clear Debris: Remove all toys, food, leaves, or sticks from the slide’s surface and pool area.
Rinse Thoroughly: Spray the slide with a hose to remove loose dirt and muddy spots.
Deep Cleaning: For tougher grime, use a vinyl-safe cleaning solution (avoid bleach). Apply with a soft brush or sponge, focusing on high-traffic and visibly dirty areas. Rinse completely to remove cleaner residue.
Disinfect: Wipe down high-touch surfaces (handrails, ladders, landings) with a bleach-free disinfectant wipe. Do not rinse unless directed by the manufacturer.
Dry Completely: Air dry in the sun or use towels/leaf blowers. The unit must be fully dry—inside and out—before deflating and storing to prevent mold and mildew.
Drain All Water: Empty pools, remove trapped water from creases, and tip the slide to let water escape.
Check for Damage: Inspect for any new holes, tears, or loose seams while it’s still inflated and report issues promptly.
Store Properly: Fold and roll the slide only when completely dry. Store in a cool, dry place, protected from sunlight and extreme temperatures. Use storage bags if provided.
Protect Your Deposit: If you’re returning the rental, wipe down and drain thoroughly as required to avoid extra cleaning fees. Notify the provider of any damage or concerns after use.
Supervise Constantly: Keep an adult on duty during all use—especially with children.
No Sharp Objects: Shoes, jewelry, and other sharp items must be removed before sliding.
Emergency Plan: Have a first aid kit and emergency contacts on hand just in case.
Communicate: Reach out to your rental company if you notice unusual wear or issues—they’ll often help with cleaning, maintenance, or repairs for peace of mind.
With this complete guide to cleaning, setup, and care, your water slide rental experience will stay smooth, safe, and super-fun from start to finish!
<< Return to news